josephiris44

How to Replace Door Locks Replacing the door lock could be a tricky task. It is crucial to secure your home from intruders. You should also change your locks when you get an additional housemate or if you lease out your home. Most new locks have been made for standard width doors. If your door is more thick, you'll need a “thick-door” kit with longer screws and longer tail pieces for the deadbolt. The old lock can be removed It is necessary to remove your old lock from the door before you can install the new lock. This can be accomplished with a few basic tools, but it's crucial to take care not to harm the door or frame. Using the right tools will help you avoid costly repairs in the future. Remove the screws that hold the trim and handle. You can use a screwdriver to do this. Once the screws are removed, you can take off the trim. You can then access the screw that holds the handle and trim to the door. After RepairMyWindowsAndDoors have removed the screw and the lock cylinder as well as open the handle. One of the most common indicators that your lock is failing is when you are unable to longer wiggle the key inside. This is due to the tumblers wearing out and eventually stopping moving upwards or downwards, which causes the lock to cease to function. If this happens, you'll have to bring the lock to a locksmith in order to be reset-keyed. When you're ready for replacing your deadbolt, start by stripping the screws that fix the faceplate. If your kit doesn't contain new screws, purchase them at a hardware store. If you're installing a mortise locking, you will also need to remove the screws holding the external roseplate to the door. After removing the screws, remove the plate and dead bolt. Then, search for a hole in the interior trim of the handle. If you find one, insert straightened safety pins into it. You could also try a flat screwdriver against an opening or slot. This should release the lock handle and expose screws that can be removed in order to remove the entire lock from the door. Installing the new lock If you're looking to change your lock following a burglary or simply want to improve the look of your door installing a new lock is relatively simple. However, it is essential to measure the door in order to ensure that you buy the right lock that is the right size for your door. This is particularly important for deadbolts, as they must be a certain size to fit into the bolt pocket and strikeplate. Contact your local hardware store for help in case you don't know what measurement to take. If you are replacing a mortice, you can use the existing centrerail as a reference to place the new mortise. After you've marked the location of the lock, you'll need to drill holes along the centre line which are the same width as the lock. Then, chisel the wood until you've got a rectangular space to accommodate the mortice lock. After that, insert the lock and outline the faceplate with a marking knife. Mark and drill screw holes to secure the faceplate. You can save money on changing locks by purchasing an entry-level set that comes with an re-keyable key as well as a blank key. These kits are available from many online retailers as well as hardware and home improvement stores. The kits also come with instructions to help you complete your task. Check your lease agreement if you are renting prior to changing locks. It may require that you provide the landlord with an access key to the new lock. You may need to replace the old lock with a more standard one if you are required to do so. You can buy a basic lock at your local hardware store, or buy a smart lock that connects to the Wi-Fi of your home and allows you to lock and unlock your door from afar. A good choice is a Schlage Smart Lock, which is compatible with most door knobs and levers. The system can be linked to an intelligent home security hub to allow you to receive alerts when your door is not locked or opened. Installing a new lock A broken lock can be a security threat, so it is important to replace it as soon as possible. It's a good thing that replacing the door lock is a simple project that anyone can tackle. The first step is removing the old lock. This is done by unscrewing the screws that secure it and then removing it. You may require a screwdriver or an Allen wrench depending on the type of lock you have. Keep all the parts of the old lock and put them in a secure location. Then, insert the new lock into the door. Most kits include a cardboard template of how the lock will fit on the door. If the template does not match up with your door you can trace it with a pencil or use a chisel take off any extra material. Once the new lock has been put installed, ensure that the interior latch plate is aligned with the mortise lockset hole for an ideal fit. When installing the new lock, be cautious not to over tighten it. This can cause your lock to rattle, or even break. If you have a lock that is keyed, be sure that the spindle is in alignment with the hole in the knob. If it's not then you can make use of a screwdriver in order to push the spindle through the lock and into the knob. Install the decorative baseplate that is included with the lock after you've completed installing it. If the lock doesn't come with a base plate with a design then you can purchase one that is compatible with the hardware. The final step is to test the new lock to make sure it functions. You can do this by inserting the key into the lock and turning it to make sure that it is able to open. If it doesn't work then you must contact a locksmith. Rekeying your locks by a professional can also help to prevent burglaries. This involves changing the internal tumblers of your lock to make it unreceptive to your old keys. This will make your home safe and provide you with peace of mind. Test the new lock Installing an entirely new lock is a great way to ensure that it will work according to the specifications. It is essential to follow the instructions. You might not be able to open your door if you don't. You can ask an expert locksmith for help when you're not sure what to do. A locksmith can give you suggestions on the best locks for your house. If you're having trouble opening your lock, there could be an issue with the handle or latch. Try lubricating your latch by spraying it with WD-40. In some cases it will resolve the problem. However, you might need to replace the latch completely if it's no longer functioning properly. The lock may have been installed incorrectly. The handle clip inside the door may be damaged or not present on the new lock. In this case you must remove the handle from the inside and insert a plastic retainer clip. After that, you can connect the handle to the lock and test its operation. It's crucial to check the keypad after replacing your lock to ensure that it works correctly. You can test it by inserting the key inside and turning it. If the keypad is functioning properly, it should unlock and lock your door. It is also advisable to check the deadbolt lock to see whether it's working properly. If it's not then you must remove the latch and undo the Phillips head screws on the sides of the door to release it. Replace the old deadbolt with the new one. Be sure to align and load in the deadbolt lock correctly. Spindle testing is a different method to test a new lock. This can be done by inserting a screwdriver in the spindle. This test should always be conducted prior to reinstalling the lock to avoid any errors.